· Galvanized steel wire

Galvanized steel wire

category:· Galvanized steel wire

product specifications:

release time:2023-09-20

number of visits:70

Consultation details

product description:

The galvanized steel wire series uses mid-to-high-end carbon steel wire rods of high-quality carbon structural steel as raw materials. After being drawn into steel wires, hot-dip galvanizing and electro-galvanizing are used to coat the surface of the steel wires with a considerable thickness of zinc layer.     Hot-dip galvanized steel wire series

Nominal diameter:φ1.4-4.0mm;Zinc layer range:80-320g/㎡

Adopting an intelligent zinc layer automatic control system, the surface of the galvanized steel wire is smooth and clean, the coating is uniform, and the adhesion is good. The weight of the zinc layer of the steel wire fluctuates.≤30g/㎡。

Active pay-off, there are two take-up methods: I-shaped wheel take-up and inverted plum blossom take-up.The I-beam take-up department provides I-beam models that meet customer requirements; the maximum weight of the inverted plum blossom take-up piece can reach 900Kg, the normal outer diameter is 900mm, and the inner diameter is 450mm. It can also be adjusted appropriately according to customer requirements.

Bright electroplated steel wire diameter series

Nominal diameter: φ0.6-4.5mm. The steel wire surface is smooth and bright, with uniform coating and good adhesion. It adopts vertical passive pay-off and has two take-up methods: I-wheel take-up and inverted plum blossom take-up.The I-beam take-up department provides I-beam models that meet customer requirements. The maximum weight of the inverted plum blossom take-up piece can reach 900Kg, the normal outer diameter is 900mm, and the inner diameter is 450mm. It can also be adjusted appropriately according to customer requirements.

Bright steel wire mechanical properties table

Nominal diameter

Tensile strength MPa≥

Elongation %≥

Twist≥

0.6-0.7

1800

2.5

20

0.8-1.0

1700

2.5

18

1.1-2.5

1600

3

16

2.6-3.0

1500

3.5

14

3.1-3.6

1400

3.5

14

3.7-4.0

1300

4

12

4.1-4.5

1200

4

12

 

Heat treatment electroplated steel wire series

Nominal diameter: φ1.8-4.5mm, the steel wire surface is smooth and clean, the coating is uniform, and the adhesion is good. It adopts vertical passive pay-off and inverted plum blossom take-up method.The maximum weight of the inverted plum blossom take-up piece can reach 900Kg, the normal outer diameter is 900mm, and the inner diameter is 450mm. It can also be adjusted appropriately according to customer requirements.

Mechanical properties table of heat treated electroplated steel wire

Steel number

Tensile strength MPa

Elongation %≥

45

800-950

14

50

850-1000

12

55

900-1050

12

60

950-1100

10

65

1000-1150

10

70

1050-1200

8

80

1150-1300

8


Fine gauge electro-galvanized steel wire series

Nominal diameter: φ0.8-1.2mm, using water tank drawing, plating first and then pulling, I-shaped wheel take-up, the galvanized steel wire surface is smooth, bright and clean, the coating is uniform, and the adhesion is good.Galvanized steel wire series are mainly used for: deep processing of metal products, agricultural greenhouses, farms, cage nets, cotton baling, hose reinforcement, springs, cleaning balls, metal products, steel wire ropes, and steel strands.



Welcome to leave a message for detailed information!

Copyright© SHANDONG JINGWEI STEEL CORD CO.,LTD.

Technical Support:fangyuanwangtong

鲁ICP备17036996号-1

鲁公网安备 37079402000798号

XMLmap